Yaesu FT-60: Difference between revisions

From OpenHam Wiki
Jump to navigation Jump to search
No edit summary
(Ni-MH battery is still standard in US)
Line 3: Line 3:
The '''Yaesu FT-60/R''' is a model of analog-only dual band [[Handheld Transceiver]] produced by [[Yaesu Vertex]] since 2003, it is a rugged and revolutionary HT still popular with hams today, based on a commerical design, it expanded on the previous FT-50 model and introduced new features which would later become standard on later HTs, features include VHF/UHF operation, airband Rx, Orange screen backlight for easy night viewing, 1750 Hz tone generator, DTMF tone generator, Yaesu [[Wires]] system support, CTCSS/DCS tone encoding/decoding, CTCSS/DCS Paging, [[Automatic Range Transponder System]], Emergancy Automatic ID and many more.
The '''Yaesu FT-60/R''' is a model of analog-only dual band [[Handheld Transceiver]] produced by [[Yaesu Vertex]] since 2003, it is a rugged and revolutionary HT still popular with hams today, based on a commerical design, it expanded on the previous FT-50 model and introduced new features which would later become standard on later HTs, features include VHF/UHF operation, airband Rx, Orange screen backlight for easy night viewing, 1750 Hz tone generator, DTMF tone generator, Yaesu [[Wires]] system support, CTCSS/DCS tone encoding/decoding, CTCSS/DCS Paging, [[Automatic Range Transponder System]], Emergancy Automatic ID and many more.


Early models used a Ni-MH battery pack charged via a wall adapter which plugged into the radios DC jack, newer models use a Li-ion battery pack, changing regulations in 2013 regarding overcharge protections meant that Li-ion battery models can only be charged from a suitable Yaesu/Vertex charging dock, earlier models can be retrofitted to use Li-ion batteries if the modern charging dock is available.
Early models used a Ni-MH battery pack charged via a wall adapter which plugged into the radios DC jack, newer models use a Li-ion battery pack, changing regulations in 2013 regarding overcharge protections meant that Li-ion battery models can only be charged from a suitable Yaesu/Vertex charging dock, earlier models can be retrofitted to use Li-ion batteries if the modern charging dock is available.  In the US the radio is still sold with a Ni-MH battery pack.  An optional battery pack holding 6 AA batteries is also available.


Out of the factory the HT is capable of operation on 2m and 70cm but can be [[MARS/CAP modded][ allow operation on a wider band, and as with any receiver, models sold in america do not support receiving of the cellular band, and even MARS/CAP modded, they supposedly lack the crystals to Tx on airband (but '''please''' do not try this without a good [[dummy load]] attached, any [[QRM]] to the airband is taken seriously)
Out of the factory the HT is capable of operation on 2m and 70cm but can be [[MARS/CAP modded][ allow operation on a wider band, and as with any receiver, models sold in america do not support receiving of the cellular band, and even MARS/CAP modded, they supposedly lack the crystals to Tx on airband (but '''please''' do not try this without a good [[dummy load]] attached, any [[QRM]] to the airband is taken seriously)


The output is advertised as being 5 watt on high power, 2 watt on medium power and 0.5 watt on low power, a standard Yaesu [[Rubber Ducky]] is included with the HT, though this can be swapped out with any other antenna thanks to the use of an SMA antenna socket.
The output is advertised as being 5 watt on high power, 2 watt on medium power and 0.5 watt on low power, a standard Yaesu [[Rubber Ducky]] is included with the HT, though this can be swapped out with any other antenna thanks to the use of an SMA antenna socket.

Revision as of 23:08, 6 October 2023

File:Picture of said radio should be here
Yaesu FT-60

The Yaesu FT-60/R is a model of analog-only dual band Handheld Transceiver produced by Yaesu Vertex since 2003, it is a rugged and revolutionary HT still popular with hams today, based on a commerical design, it expanded on the previous FT-50 model and introduced new features which would later become standard on later HTs, features include VHF/UHF operation, airband Rx, Orange screen backlight for easy night viewing, 1750 Hz tone generator, DTMF tone generator, Yaesu Wires system support, CTCSS/DCS tone encoding/decoding, CTCSS/DCS Paging, Automatic Range Transponder System, Emergancy Automatic ID and many more.

Early models used a Ni-MH battery pack charged via a wall adapter which plugged into the radios DC jack, newer models use a Li-ion battery pack, changing regulations in 2013 regarding overcharge protections meant that Li-ion battery models can only be charged from a suitable Yaesu/Vertex charging dock, earlier models can be retrofitted to use Li-ion batteries if the modern charging dock is available. In the US the radio is still sold with a Ni-MH battery pack. An optional battery pack holding 6 AA batteries is also available.

Out of the factory the HT is capable of operation on 2m and 70cm but can be [[MARS/CAP modded][ allow operation on a wider band, and as with any receiver, models sold in america do not support receiving of the cellular band, and even MARS/CAP modded, they supposedly lack the crystals to Tx on airband (but please do not try this without a good dummy load attached, any QRM to the airband is taken seriously)

The output is advertised as being 5 watt on high power, 2 watt on medium power and 0.5 watt on low power, a standard Yaesu Rubber Ducky is included with the HT, though this can be swapped out with any other antenna thanks to the use of an SMA antenna socket.